Forester F4-2.5L SOHC (2004)
3. Install the rear drive shaft to rear differential using ST.
ST2 8099PA090 OIL SEAL PROTECTOR
4. Attach the front lateral link and rear lateral link to housing using a new self-locking nuts.
Tightening torque: 137 Nm (14 kgf-m, 104 ft. lbs.)
5. Attach the trailing link to housing using a new self-locking nut.
Tightening torque: 113 Nm (11.5 kgf-m, 83 ft. lbs.)
6. Install the stabilizer link.
Tightening torque: 45 Nm (4.6 kgf-m, 33 ft. lbs.)
7. Install the ABS sensor.
Tightening torque: 32 Nm (3.3 kgf-m, 24 ft. lbs.)