Forester F4-2.5L Turbo (2009)
Evaporator Core: Service and Repair
The content of this article / image reflects Manual update # 18-140-09 dated 05/07/09.
Evaporator
REMOVAL
1. Disconnect the ground cable from battery.
2. Using the refrigerant recovery system, drain the refrigerant.
3. Remove the bolt and detach the pipe from expansion valve.
4. Remove the instrument panel lower.
5. Remove the two screws and remove the evaporator pipe cover.
6. Remove the two bolts and remove the evaporator pipe.
7. Remove the two screws and remove the evaporator cover.