Forester F4-2.5L Turbo (2009)
1. Set the voltage meter between terminal No. 7 (+) and - No. 2 (-).
2. Connect the battery to connector. (Terminal No. 17 (+), terminal No. 2 & 16 (-))
3. Turn the front wiper switch to INT.
4. Connect the battery (+) to the terminal No. 16 for 5 seconds.
5. Connect the battery (-) to the terminal No. 16, and check the voltage between terminal No. 7 - No. 2 when performing the intermittent
operation.
6. Perform step 1) to 5) when intermittent control switch is in MIN or MAX, and replace the switch if the operation is not as specified.
REAR WIPER
1. Check with Subaru Select Monitor