Forester F4-2.5L Turbo (2009)
Wiper Motor: Testing and Inspection
Front Wiper Motor and Link
Front Wiper Motor and Link
INSPECTION
1. Check that the wiper motor operates at low speed when the battery is connected to the connectors terminal as shown in the figure.
2. Check that the wiper motor operates at high speed when the battery is connected to the connectors terminal as shown in the figure.
3. Connect the battery to the terminals to the connector, run the motor at low speed, and then disconnect the terminal to stop the wiper motor in mid
motion.
4. Connect the battery and confirm that the motor stops at the automatic stop position after the motor operates at low speed.