Forester AWD F4-2.5L DOHC (1998)
1) Align mark on crankshaft sprocket with mark on the oil pump cover at cylinder block.
2) Align single line mark on right-hand exhaust camshaft sprocket with notch on belt cover.
3) Align single line mark on right-hand exhaust camshaft sprocket with notch on belt cover. (Make sure double lines on intake camshaft and
exhaust camshaft sprockets are aligned.)
4) Align single line mark on left-hand exhaust camshaft sprocket with notch on belt cover by turning sprocket counter-clockwise (as viewed from
front of engine).
5) Align single line mark on left-hand intake camshaft sprocket with notch on belt cover by turning sprocket clockwise (as viewed from front of