Forester AWD F4-2.5L DOHC (1998)
9) Set (D) extension and (E) ratchet in turn onto the connected tools in plug hole, and remove spark plug using them.
8) Cover ABS pipes with a rag to prevent damage.
2. #2 SPARK PLUG
1) Disconnect battery ground cable.
2) Remove battery.
3) Remove #2 spark plug cord by pulling boot, not cord itself.
4) For subsequent procedures, refer to the procedure for #1 spark plug.
CAUTION: When removing spark plug, cover the ATF cooling pipes with a rag to prevent damage.
3. #3 SPARK PLUG