Forester AWD F4-2.5L DOHC (1998)
5. Remove bolts securing crossmember to vehicle body, and remove crossmember.
6. Scribe an alignment mark on rear lateral link cam bolt and crossmember.
7. Remove four bolts securing front and rear lateral links to crossmember by loosening nuts.
INSPECTION
Check removed parts for damage and cracks, and correct or replace if defective.
INSTALLATION
1. Install in reverse order of removal.
NOTE: One of the four crossmember installing bolts has a larger diameter than the others. Install it first.
2. Install rear differential.
CAUTION: Always tighten rubber bushing when wheels are in full contact with the ground and vehicle is at curb weight condition.
NOTE: Check wheel alignment and adjust if necessary.