Forester S F4-2.5L DOHC (1998)
Specified lubricant:
TIRE LUBE: water = 1:3
2. Press ST plunger until bushing flange protrudes beyond trailing link.
ST 927730000 INSTALLER & REMOVER SET
3. Turn trailing link upside down. Press ST plunger in the direction opposite that outlined in the former procedure until bushing is correctly
positioned in trailing link.
ST 927730000 INSTALLER & REMOVER SET
INSTALLATION
Installation is in the reverse order of removal.
CAUTION: Always tighten rubber bushing location when wheels are in full contact with the ground and vehicle is at curb weight condition.
NOTE: Check wheel alignment and adjust if necessary.