Hatchback 2WD F4-1781cc 1.8L (1982)
3.
Submit to your distributor a separate MSA 400 for the wiring harness parts and labor costs.
NOTE:
refer to illustration for appropriate operation number and time allowance.
4.
Attach an MSA 402 (A) and material scrap copy (green copy) to the wiring harness section that includes the damaged area and return the
defective section using standard warranty parts scrapping procedures that are applicable in your area.
5.
In addition, for reimbursement of protective cover installation on new harness, complete the dealer portion of the 2-part "Recall
Certification/Repair Order Form" and remove the 1st copy (dealer copy) of the 2-part form and retain for dealer records.
6.
Send remaining copy of the "Recall Certification/Repair Order Form" to the dealer's distributor on a weekly basis in an envelope with
postage prepaid by the dealer.
(B)
1.
If no damage is present to harness
OR
wire insulation is chaffed but no copper conductor is exposed, tape and/or repair the affected area as necessary and install the protective
covers. Time allowance is 0.2 hour.
2.
Complete the dealer portion of the 2-part "Recall Certification Repair Order Form" and remove the 1st copy (dealer copy) of the 2-part form
and retain for dealer records.
3.
Send remaining copy of the "Recall Certification/Repair Order Form" to the dealer's distributor on a weekly basis in an envelope with
postage prepaid by the dealer.
NOTE:
YOU ARE NOT TO MAIL THE FORM DIRECTLY TO SUBARU OF AMERICA.
Included in this letter or provided under separate shipment are the following:
One (1) copy of Table I listing the affected Vehicle Identification Number ranges.
One (1) copy of Table II listing the flat rate time allowance for wiring harness replacement.
One (1) copy of the recall notification letter which will be sent to each owner of the potentially affected vehicles.
One (1) copy of the 2-part "Recall Certification/Repair Order Form" which will be sent to each owner of the potentially affected vehicles.
Two (2) copies of the repair procedures. Two (2) rolls of electrical tape.
Ten (10) parts kits (SPS 900 200)
It is your responsibility as a Subaru Dealer to correct the affected vehicles presented to you by the owners in response to the Subaru of America, Inc.
notification letters. Labor is to be furnished to the owners free of charge. Any affected vehicles in your inventory must be repaired prior to sale.
RECORD KEEPING
We recommend that you establish a service file on this recall campaign and keep all documents relating to this campaign in that file.