subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Refrigerant > < Heater Core|Service and Repair|Page 2195
Page 1
background image

Receiver Dryer: Technical Service Bulletins
A/C Receiver Dryer - Production Chain

NUMBER

10-35-83

DATE

07-10-83

APPLICABILITY

ALL VEHICLES WITH LINE INSTALLED AIR
CONDITIONERS

SUBJECT:

RECEIVER DRIER PRODUCTION CHANGE

A Production change has been made to the line installed air conditioners.. All vehicles built after February 3, 1983, will have a larger receiver drier. The
starting serial numbers are listed below.

4 Door

215428

Hardtop

308973

Station Wagon

437113

Brat

502001

The capacity of the receiver drier has been increased from 260 cc to 420 cc.

FIGURE 1

The inlet and outlet fittings have been relocated to the top of the receiver drier. Both the condenser to receiver drier pipe (liquid pipe number 2) and the
receiver drier to evaporator pipe (liquid pipe number 1) have been changed to accommodate the new receiver drier configuration. Also, the fan pressure
switch has been relocated from the top of the receiver drier to a fitting on the condenser to receiver drier pipe. See Figure 1.
The part numbers for the new receiver drier and liquid pipes are:

Description

Part Number

RECEIVER DRIER

SOA 204 660

CONDENSER TO RECEIVER DRIER PIPE (Liquid pipe Number 2)

SOA 204 659

RECEIVER DRIER TO EVAPORATOR PIPE (Liquid Pipe Number 1)

SOA 204 658

The system freon specification is still 26 ounces. System cooling performance is not changed.

Flat Rate times for replacing the new components remain the same.

Refrigerant > < Heater Core|Service and Repair|Page 2195