Subaru Workshop Manuals
Hatchback 4WD F4-1781cc 1.8L (1983)
Instrument Panel, Gauges and Warning Indicators > Audible Warning Device > Component Information > Diagrams > Diagram Information and Instructions > Page 2441
Fig. 4 Single Wire Feed Fusible Link
Fig. 5 Double Wire Feed Fusible Link
To replace a damaged fusible link, Fig. 4, cut it off beyond the splice. Replace with a repair link. When connecting the repair link, strip wire
To replace a damaged fusible link which feeds two harness wires, cut them both off beyond the splice. Use two repair links, one spliced to each
The following general repair procedures can be used to repair most types of connectors. The repair procedures are divided into three general groups:
See CONNECTOR TERMINAL I.D. to determine which type of connector is to be serviced.
Use the proper Pick(s) or Tool(s) that apply to the terminal.
|[PREV PAGE] [NEXT PAGE]|