Hatchback 4WD F4-1781cc 1.8L (1983)
IN ADDRESS BLOCK
IN UPPER RIGHT
-Vehicle Serial Number
-Claim Number
-Recall Campaign Number
-Distributor/Dealer Number
-Owner's Name
-Owner's Address
-City, State Zip Coder
IN DEALER BLOCK (to be completed by repairing dealer)
Repairing Dealer Code No.
Repairing Dealer Signature
Date of Repair
1.
CREDIT FOR CAMPAIGN
Credit for the performance of the inspection and bracket alignment or clamp installation for non-Turbo or Turbo vehicles respectively, will be
provided from the Recall Certification/Repair Order Form. Credit for accelerator cable replacements on either non-Turbo or Turbo vehicles will be
made from an MSA-400, Dealer Claim for Credit accompanied by the Recall Certification/Repair Order Form. Therefore, it is very important that
all of the information on the form be complete and correct.
All claims for reimbursement should follow the procedures outlined below:
A.
You must complete the two-part Recall Certification/Repair Order Form and remove and retain the first copy for your records.
You will be reimbursed upon submission of the remaining copy of the Recall Certification/Repair Order Form to your Distributor in an envelope
with postage prepaid as follows:
1.
Non-Turbo vehicles - equal to 0.2 hours labor multiplied by your current hourly warranty labor rate. This covers inspection of the cable,
bracket and adjustment of bracket.
2.
Turbo vehicles - equal to 0.3 hours multiplied by your current hourly warranty labor rate. This covers the inspection of the cable and the
installation of two (2) clamps (SPS 053160).
B.
If additional repairs such as accelerator cable replacement are required, then you must complete an MSA-400, Dealer Claim for Credit and
forward it with the Recall Certification/Repair Order Form to your Distributor in an envelope with postage prepaid. Acceptable claims and credit
allowances are as follows (see illustration).
2.
PARTS SCRAPPING
All replaced accelerator cables must be field scrapped by a Distributor Representative.