Do Not Sell My Personal Information
subaru Workshop Repair Guides

Subaru Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Wiper Switch: Service and Repair
Windshield Wiper Switch Replace

1.

Disconnect battery ground cable and remove lower steering column cover and column bracket retaining bolts.

2.

Remove instrument cluster bezel retaining screws and the bezel.

3.

Pry off switch knob taking care not to damage knob or panel, then remove switch retaining nut.

4.

Pull down on steering column just enough to gain access to switch, then withdraw switch from rear of panel.

5.

Disconnect electrical connector and remove wiper/washer switch.

6.

Reverse procedure to install.

Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Wiper Switch > Component Information > Service and Repair > Combination Switch > Page 690

< PREV PAGE NEXT PAGE >