Workshop Repair Manuals

Subaru Workshop Manuals

[PREV PAGE] [NEXT PAGE]

subaru Workshop Repair Guides


Hatchback 4WD F4-1781cc 1.8L (1983)

Transmission and Drivetrain > Continuously Variable Transmission/Transaxle, CVT > Component Information > Technical Service Bulletins > Technical Service Bulletins for Continuously Variable Transmission/Transaxle: > ATRATB8748 > Aug > 87 > A/T - Slipping or No-Shift/Metal Sealing Rings > Page 1664

Page 2
background image

2.

Place ring in bore of drum where they will be running. (See Figures 1 & 2)

3.

Sealing rings should be snug in bore; rings should fit all around the drum. (drum could be out-of-round)

4.

Air check all drums. (Use 30 PSI air pressure only.) If air escapes you have leaks -- better find now, than later. This represents lost clutch pressure,
and could result in soft application and burned friction material.

5.

Following these steps will help you save money, plus help you build better units.

Transmission and Drivetrain > Continuously Variable Transmission/Transaxle, CVT > Component Information > Technical Service Bulletins > Technical Service Bulletins for Continuously Variable Transmission/Transaxle: > ATRATB8748 > Aug > 87 > A/T - Slipping or No-Shift/Metal Sealing Rings > Page 1664

[PREV PAGE] [NEXT PAGE]