Impreza F4-2.5L (2008)
2) Install the front side belt (C), and adjust the slider bolt (B) so as to obtain the specified belt tension.
3) Tighten the bolt (A).
4) Tighten the slider bolt (B).
5) Install the air intake duct.
6) Install the V-belt cover.
REAR SIDE BELT
CAUTION:
^
Always use new rear side belt.
^
Be careful that the new rear side belt does not come into contact with any oil, grease or coolant.
^
Be careful when touching the belt. If the end face of the belt is rubbed by hand, you may receive injury from bared wires.
^
When installing the rear side belt, always use the provided tools (belt stopper, belt guide, belt guide holder and bolt).