Drive Belt: Description and Operation (page 10 of 12)
- Make
- Subaru
- Model
- Impreza F4-
- Engine
- 2.5L
- Year
- 2008
- Section
- Drive Belt
MaintenanceDescription and Operation · page 10 of 12
13) Turn the crank pulley slowly to the right, and attach the rear side belt.
CAUTION:
Because there is a possibility of damage to the rear side belt, and the belt guide holder failing off, care must be taken to make sure that the
total of steps 8),11),12), and 13) does not exceed 330°.
14) Remove the belt guide and belt guide holder from the crank pulley.
15) Remove the belt stopper from the compressor bracket.
CAUTION:
Make sure to remove the belt stopper, as leaving it on can cause smoke, flames or belt breakage.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2008 Subaru Impreza 2.5L
- PARTOil filterSearch: Subaru Impreza 2008 2.5L oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Subaru Impreza engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.