Impreza F4-2.5L SOHC (2003)
15. Pull the rack assembly from the cylinder side, and draw out the rack bushing and rack stopper together with the rack assembly.
CAUTION: Be careful not to contact rack to inner wall of cylinder when drawing out. Any scratch on cylinder inner wall will cause oil leakage.
16. Remove the rack bushing and rack stopper from the rack assembly.
CAUTION: Do not reuse removed rack bushing and circlip.
17. Remove the oil seal from rack.
18. Insert ST from the pinion housing side and remove the oil seal using a press.
ST 34099FA110 INSTALLER
NOTE: Discard the removed the oil seal.
CONTROL VALVE
1. Disconnect the four pipes from the gearbox.
NOTE: Remove the pipes E and F as a single unit being fixed at the clamp plate.
2. Secure the gearbox removed from the vehicle in vice using ST.
ST 926200000 STAND