Impreza F4-2.5L SOHC (2003)
10) Using ST, install the DOJ into differential.
ST 28099PA090 SIDE OIL SEAL PROTECTOR
11) Insert the DOJ spline end into the bore of side oil seal, and remove ST.
CAUTION: Do not allow DOJ splines to damage side oil seal.
ST 28099PA090 SIDE OIL SEAL PROTECTOR
12) Align the DOJ and differential splines.
13) Push the housing to insert DOJ into the differential.
NOTE:
^
Make sure the DOJ is inserted properly.
CAUTION: Discard old self-locking nut. Replace with a new one.
14) Connect the rear housing assembly to the trailing link assembly, and tighten the self-locking nut.
15) Connect the rear housing assembly to the lateral link assembly, and tighten the self-locking nut.
16) Connect the stabilizer link to the lateral link.
17) Install the ABS sensor clamps and parking brake cable bracket.