subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Doors, Hood and Trunk > < Rear Bumper|Diagrams
Page 1
background image

Cowl Moulding / Trim: Service and Repair

1. Remove wiper arms.
2. Open front hood.
3. Pry clip off front hood seal using a screwdriver.

4. Lift cowl panel and remove clips from windshield.

5. Installation is in the reverse order of removal.

NOTE:  Install middle clip and other clips in that order.

Doors, Hood and Trunk > < Rear Bumper|Diagrams