subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Doors, Hood and Trunk|Service and Repair > < Doors, Hood and Trunk|Diagrams|Page 4501
Page 1
background image

Hood: Adjustments

1. Fore-aft and left-right adjustments Loosen striker mounting bolts and adjust fore-and-aft position of striker.

CAUTION:
Do not adjust striker position using the lock.
Doing so may result in a misaligned front grille.

2. Up-down adjustment

Make up-and-down adjustment of striker only when hood does not properly contact buffer or hood is not flush with fender, or when release cable
does not properly operate. Adjustment can be made by adjusting the stroke length of striker after lock assembly mounting screws are removed.

Doors, Hood and Trunk|Service and Repair > < Doors, Hood and Trunk|Diagrams|Page 4501