Impreza 2.5 RS Coupe F4-2.5L SOHC (2000)
![background image](/subaru/impreza_2.5_rs_coupe/f4-2.5l_sohc/Page-916001.png)
Brake Hose/Line: Service and Repair
Brake Line
A: SUPPLEMENTAL RESTRAINT SYSTEM "AIRBAG"
Airbag system wiring harness is routed near the center brake pipe
CAUTION:
-
All Airbag system wiring harness and connectors are colored yellow. Do not use electrical test equipment on these circuit.
-
Be careful not to damage Airbag system wiring harness when servicing the center brake pipe.
B: REMOVAL AND INSTALLATION
CAUTION:
-
When removing and installing the brake pipe, make sure that it is not bent.
-
After installing the brake pipe and hose, bleed the air.
-
After installing the brake hose, make sure that it does not touch the tire or suspension assembly, etc.
Brake pipe tightening torque: 15 +3/-2 Nm (1.5 +0.3/-0.2 kg-m 10.8 +2.2/-1.4 ft. lbs.)