subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Service Specifications|Page 1486 > < Service Specifications|Page 1484
Page 1
background image

Water Pump: Service and Repair

REMOVAL 

WARNING:  The radiator is pressurized. Wait until engine cools down before working on the radiator.

1) Disconnect ground cable from battery.
2) Lift-up the vehicle.
3) Remove under cover.

4) Drain engine coolant completely.

5) Disconnect radiator outlet hose (A) and heater by-pass hose (B) from water pump.

6) Disconnect connectors from radiator main fan (A) and sub fan (B) motors.

Service Specifications|Page 1486 > < Service Specifications|Page 1484