subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Service Specifications|Page 1292 > < Service Specifications|Page 1290
Page 4
background image

18) Remove left-hand belt cover No. 2.

19) Remove tensioner bracket.
20) Remove tensioner bracket. 
21) Disconnect heater hose from water pump. 

22) Remove water pump.

INSPECTION 

1) Check water pump bearing for smooth rotation. 
2) Check water pump pulley for abnormalities. 

3) Using a dial gauge, measure impeller runout in thrust direction while rotating the pulley.

"Thrust" runout limit: 0 5 mm (D 021) inch) 

Service Specifications|Page 1292 > < Service Specifications|Page 1290