Impreza 2.5 RS Coupe F4-2.5L SOHC (2000)
YES:
Go to step 5L7.
NO:
Replace airbag main harness.
5L7: AIRBAG MAIN HARNESS INSPECTION
Measure resistance across test harness I or I2 connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 10 k-Ohms?
YES:
Go to step 5L8.
NO:
Replace airbag main harness.
5L8: FRONT SUB SENSOR HARNESS (LH) INSPECTION
1. Connect test harness F connector (1F) and connector (AB12).
2. Disconnect connector (AB13) from front sub sensor (LH) and then test harness H connector (1H) and connector (AB13).
3. Measure resistance between test harness F connector (3F) terminal and test harness H connector (3H) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5L9.
NO:
Replace front sub sensor harness (LH).
5L9: FRONT SUB SENSOR HARNESS (LH) INSPECTION
Measure resistance between test harness F connector (3F) terminal and test harness H connector (3H) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5L10.