Impreza 2.5 RS Coupe F4-2.5L SOHC (2000)
Clutch Pedal Assembly: Service and Repair
ON-CAR SERVICE
BRAKE PEDAL
1) Check position of pedal pad.
Pedal height: L 148 mm (5.83 inch)
2) If it is not in specified value, adjust it by adjusting brake booster operating rod length.
3) Measure the clearance between threaded end of stop light switch and stopper. If it is not in specified value, adjust it by adjusting position of stop
light switch.
CAUTION: Be careful not to rotate stop light switch.
Stop light switch clearance: A 0.3 mm (0.012 inch)
4) Apply grease to operating rod connecting pin to prevent it from wearing.
ACCELERATOR PEDAL