Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
2. REAR PILLAR UPPER TRIM PANEL (SEDAN)
1. Remove rear seat cushion and backrest.
2. Remove tapping screw from rear pillar lower trim panel, and remove trim panel by sliding it forward.
3. Remove front pillar upper trim end.
4. Pry the pawl off front end using screwdriver.
5. Remove clips which hold rear pillar upper trim, and remove trim panel by sliding it forward.
INSTALLATION
1. FRONT PILLAR UPPER TRIM PANEL
Install in the reverse order of removal.
CAUTION: Be sure to securely hook pawls of front pillar upper trim panel to body flange.
2. REAR PILLAR UPPER TRIM PANEL (SEDAN)
Install in the reverse order of removal.
CAUTION: Be sure to securely hook pawls of rear pillar upper trim panel to body flange.