subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Intake Air Duct > < Fuel Temperature Sensor|Service and Repair|Page 2413
Page 1
background image

Idle Speed/Throttle Actuator - Electronic: Service and Repair

REMOVAL

1. Disconnect battery ground cable.

2. Disconnect connector from idle air control solenoid valve.

3. Remove idle air control solenoid valve from throttle body.

INSTALLATION

Install in the reverse order of removal.

CAUTION:  Always use new gasket.

Intake Air Duct > < Fuel Temperature Sensor|Service and Repair|Page 2413