Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
Steering Gear Seal: Service and Repair
REPLACEMENT
Valve Housing Oil Seal
Specified steering grease: VALIANT GREASE M2 (Part No. 003608001)
1. Using ST and press, remove dust seal, oil seal and special bearing from valve housing.
ST 34099FA120 INSTALLER & REMOVER SEAL
CAUTION:
^
Do not apply a force to end surface of valve housing.
^
Do not reuse oil seal after removal.
2. Apply a coat of specified power steering fluid to inner wall of valve housing.
3. Attach ST2 to ST1, and press oil seal into place using a press.
ST1 34099FA120 INSTALLER & REMOVER SEAL
ST2 34099FA130 INSTALLER SEAL
1. Face oil seal in the direction shown in figure when installing.
2. To avoid scratching oil seal, apply a coat of grease to contact surface of installer and oil seal.
3. To facilitate installation, attach oil seal to installer and position in valve housing before pressing into place.