subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Drive Axles, Bearings and Joints > < Differential Side Seal|Page 3324
Page 4
background image

ST 498447120 OIL SEAL INSTALLER

11. Install companion flange.

12. Tighten self-locking nut within the specified torque range so that the turning resistance of companion flange becomes the same as that before

replacing oil seal.
ST 498427200 FLANGE WRENCH

CAUTION:  Use a new self-locking nut.

Tightening torque: 188 Nm (19.2 kgf-m, 139 ft. lbs.) 

13. Reassembling procedure hereafter is the reverse of the disassembling.

Drive Axles, Bearings and Joints > < Differential Side Seal|Page 3324