Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Front Door Panel: Service and Repair
Front Sealing Cover
FRONT SEALING COVER
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front door trim.
3. Remove the front speaker.
4. Using a spatula, remove the sealer.
CAUTION:
-
Carefully remove sealer. Excessive force will easily break the cover.
-
If cover gets broken, replace it with a new one.
INSTALLATION
1. Install in the reverse order of removal.
2. When replacing sealing cover, use the CEME-DINE 5430L sealer.
3. Press the sealer-applied area firmly to prevent any floating on surface.
Sealer: CEMEDINE 5430L or equivalent
CAUTION:
-
Apply a uniform bead of sealer.
-
Attach sealing cover, keeping it from becoming wrinkled.
-
Breaks in the bead will allow water leakage and contamination.