subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Rear Door Panel|Page 5694 > < Rear Door Panel|System Diagnosis|Page 5691
Page 1
background image

Rear Door Panel: Service and Repair
Rear Door Panel

REAR DOOR PANEL

REMOVAL

CAUTION:

-

During removal and installation of doors, do not damage body.

-

Doors are heavy. Be careful not to drop and damage them.

1. Disconnect the ground terminal from battery.
2. Remove the rear door trim.
3. Remove the rear door glass|
4. Remove the rear door regulator and motor assembly.
5. Remove the rear door latch.
6. Remove the rear outer handle.
7. Remove the center pillar lower trim.
8. Disconnect the connector of door harness.

9. Put a wooden block on the jack and place the jack under the door. Support the door with the jack to protect it.

10. Remove the checker bolts.

11. Remove the door-side bolts for upper and lower hinges to remove door.

Rear Door Panel|Page 5694 > < Rear Door Panel|System Diagnosis|Page 5691