Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
^
Turbo model
13. Drain the engine oil. Set a container under the vehicle, and remove drain plug from oil pan.
14. Remove the front and center exhaust pipes. (Non-Turbo model)
15. Remove the nuts which install front cushion rubber onto front crossmember.
16. Remove the bolts which install oil pan on cylinder block while raising up engine.
^
Non-Turbo model
^
Turbo model
17. Insert the oil pan cutter blade between cylinder block-to-oil pan clearance.
CAUTION: Do not use a screwdriver or similar tool in place of oil pan cutter.