subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Intake Manifold|Removal and Installation|Page 1363 > < Intake Manifold|Removal and Installation|Page 1361
Page 10
background image

3. Tighten the bolts which install power steering pump bracket.

Tightening Torque: ..............................................................................................................................................  22 Nm (2.2 kgf-m, 15.9 ft. lbs)

4. Install the power steering pipes onto the right side intake manifold protector.

5. Install the front side V-belt. <Ref. to INSTALLATION, V-belt.>
6. Install the resonator chamber.

Tightening Torque: ..............................................................................................................................................  33 Nm (3.4 kgf-m, 24.6 ft. lbs)

14. Connect the accelerator cable (A).

15. Connect the cruise control cable (B). (With cruise control models)
16. Install the air intake duct and air cleaner assembly. <Ref. to INSTALLATION, Air Intake Duct.> and <Ref. to INSTALLATION, Air Cleaner

Case.>

Intake Manifold|Removal and Installation|Page 1363 > < Intake Manifold|Removal and Installation|Page 1361