Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
4. Using the ST, tighten bolts of inhibitor switch.
ST 499267300 STOPPER PIN
Tightening torque: 3.4 Nm (0.35 kgf-cm, 2.5 ft. lbs.)
5. Install the select cable to range select lever.
6. Install the plate assembly to transmission.
Tightening torque:
T: 24.5 Nm (250 kgf-cm, 18.1 ft. lbs.)
7. Install the snap pin to range select lever.
8. Install the front exhaust pipe with center exhaust pipe. (Non-turbo model)
9. Install the center exhaust pipe. (Turbo model)
10. Lower the vehicle.
11. Install the inhibitor switch connector from stay.