subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Ignition System - DTC's P0301/P0302/P0303/P0304|Page 2865 > < Ignition System - DTC's P0301/P0302/P0303/P0304|Page 2863
Page 1
background image

Ignition Coil: Testing and Inspection

Ignition Coil and Ignitor Assembly

INSPECTION

Using an accurate tester, inspect the following items, and replace if defective.

1. Primary resistance
2. Secondary coil resistance

CAUTION:  If the resistance is extremely low, this indicates the presence of a short-circuit.

Specified resistance:

[Primary side]
Between terminal No.1 and No.2 .....................................................................................................................................................  0.73 Ohm ± 10%
Between terminal No.2 and No.4 .....................................................................................................................................................  0.73 Ohm ± 10%

[Secondary side]
Between (A) and (B) ......................................................................................................................................................................  12.8 kOhm ± 15%
Between (C) and (D) ......................................................................................................................................................................  12.8 kOhm ± 15%

3. Insulation between primary terminal and case: 10 MOhm or more.

Ignition System - DTC's P0301/P0302/P0303/P0304|Page 2865 > < Ignition System - DTC's P0301/P0302/P0303/P0304|Page 2863