subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Seat Belt Tensioner|Description and Operation|Page 5508 > < Seat Belt Tensioner|Description and Operation|Page 5506
Page 1
background image

Seat Belt Tensioner: Service and Repair

DRIVER'S AIRBAG, SIDE AIRBAG, FRONT SUB SENSOR HARNESS TO AIRBAG MAIN HARNESS AND PRETENSIONER

How to disconnect:

1. Push lock arm (A).

2. With lock arm (A) pushed in, move slide lock (B) in direction of the arrow.

3. While holding slide lock (B), return lock arm (A) to its original position and then separate the connector by pulling in the direction of the arrow.

CAUTION: When pulling, be sure to hold onto the connector and not the wire.

How to connect:

Holding the connector, and push it in carefully until a connecting sound is heard.

CAUTION: Be sure to insert the connector in until it locks.

Then pull on it gently to make sure that it is locked.

PASSENGER'S AIRBAG

How to disconnect:

Holding female connector (C) in one hand, use your other hand to pull slide lock (A) in the direction of the arrow.

Seat Belt Tensioner|Description and Operation|Page 5508 > < Seat Belt Tensioner|Description and Operation|Page 5506