subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Charging System > < Electrical - Low Battery Voltage Affects Other Systems|Page 4607
Page 1
background image

Battery: Service and Repair

REMOVAL

1. Disconnect the positive (+) terminal after disconnecting the negative (-) terminal of battery.

2. Remove the flange nuts from battery rods and take off battery holder.
3. Remove the battery.

INSTALLATION

Install in the reverse order of removal.

Tightening torque: .............................................................................................................................................................  3.4 N.m (0.35 kgf.m, 2.5 ft.lb)

NOTE:
-

Clean the battery cable terminals and apply grease to retard the formation of corrosion.

-

Connect the positive (+) terminal of battery and then the negative (-) terminal of the battery.

Charging System > < Electrical - Low Battery Voltage Affects Other Systems|Page 4607