Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
2. Tighten the bolt which install power steering pump bracket.
Tightening torque: 22 Nm (2.2 kgf-m, 15.9 ft. lbs.)
3. Interconnect the pipes C and suction hose.
Tightening torque: Joint nut 39.2 Nm (4 kgf-m, 28.9 ft. lbs.)
CAUTION: If a hose is twisted at this step, the hose may come into contact with some other parts.
4. Connect the connector to the power steering oil pressure switch.
5. Install the pulley belt to the oil pump.
6. Check the pulley belt tension.
7. Tighten the bolt belt tension.
Tightening torque: 8 Nm (0.8 kgf-m, 5.8 ft. lbs.)
8. Install the pulley belt cover.
9. Connect the ground terminal of battery.
10. Feed the specified power steering fluid.
CAUTION: Never start the engine before feeding the fluid; otherwise vane pump might be seized up.
C: DISASSEMBLY
1. NON-TURBO MODEL
1. Remove the nut and detach oil pump pulley.
2. Remove the stay from the oil pump.
3. Remove the four bolts, which secure rear cover.
