subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Steering Gear|Diagrams|Page 4877 > < Steering Gear|Diagrams|Page 4875
Page 5
background image

1. Adjust the front toe.

Standard of front toe: IN 3 - OUT 1 mm (IN 0.12 - OUT 0.039 inch)

2. Adjust the steering angle of wheels.

Standard of steering angle:

3. If the steering wheel spokes are not horizontal when wheels are set in the straight ahead position, and error is more than 5° on the periphery of

steering wheel, correctly re-install the steering wheel.

4. If the steering wheel spokes are not horizontal with vehicle set in the straight ahead position after this adjustment, correct it by turning the right

and left tie-rods in the same direction by the same turns.

Steering Gear|Diagrams|Page 4877 > < Steering Gear|Diagrams|Page 4875