Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
10. Remove the select lever lower then take away the select lever upper from plate.
11. Remove the spring and remove the detent arm.
12. Remove the cushion.
D: ASSEMBLY
1. Clean all parts before assembly.
2. Apply grease [NIGTIGHT LYW No. 2 or equivalent] to each parts.
3. Assembly is in the reverse order of disassembly.
4. After completion of fitting, transfer the select lever to range "P"-"1", then check whether the indicator and select lever agree, whether the pointer
and position mark agree and what the operating force is.