Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
8. Remove the ATF cooler pipe from frame.
9. Remove the oil cooler inlet and outlet pipes.
CAUTION: When removing the outlet pipe, be careful not to lose the ball and spring used with retaining screw.
B: INSTALLATION
1. NON-TURBO MODEL
1. Install the oil cooler outlet and inlet pipes.
CAUTION: Be sure to use a new aluminum washer.
Tightening torque:
T1: 44 Nm (4.5 kgf-cm, 32.5 ft. lbs.)
T2: 25 Nm (2.5 kgf-cm, 18.1 ft. lbs.)
