Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
CAUTION: Be sure to use a new aluminum washer.
Tightening torque:
T1: 44 Nm (4.5 kgf-cm, 32.5 ft. lbs.)
T2: 25 Nm (2.5 kgf-cm, 18.1 ft. lbs.)
2. Install the ATF cooler pipe to frame.
3. Connect the ATF cooler hose to pipe transmission side.
NOTE:
^
Install so that the hose is not folded over, excessively bent, or twisted.
^
Be careful to insert the hose to the specified position.
4. Connect the ATF cooler hose to pipe of radiator side.
NOTE:
^
Install so that the hose is not folded over, excessively bent, or twisted.
^
Be careful to insert the hose to the specified position.