Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
![background image](/subaru/impreza_2.5_rs_sedan_awd/f4-2.5l_sohc/Page-1221002.png)
11. Remove the cushion rubber from body.
12. Remove the joint and then extract the spring pin.
13. Lower the vehicle.
14. Remove the gear shift lever.
B: INSTALLATION
1. Install the joint to the transmission and secure with the straight pin.
2. Insert the gear shift lever from room side.
NOTE: After inserting the rod and stay, temporarily put them onto transmission mount.
3. Lift-up the vehicle.
4. Install the joint to shifter arm.