Impreza Brighton Coupe AWD F4-2.2L SOHC (1997)
Seats: Service and Repair
Rear Seat
REMOVAL
1. Remove bolts securing hinges (located at front of cushion) to body.
2. Slightly raise front of cushion while pushing down on cushion in the direction of "C". With cushion held in that position, move it forward until it is
unhooked.
3. Remove bolts securing lower portion of backrest to body.
4. Lift rear seat backrest in direction "A" until it is released from upper hooks.
INSTALLATION
1. Before installing backrest, ensure that trim panel, insulator and seat belt are properly installed.
2. Transfer outer seat belt webbing to front of backrest and fold backrest forward. Attach seat belt webbing to upper hooks (2 places), and move
pillow in the direction of "B" until backrest is aligned with lower mounting holes in body.
3. Secure lower center and both sides of backrest to body with bolts.
4. Slightly raise front section of cushion while pushing down on cushion in the direction of "C". With cushion held in that position, attach rear
section of cushion to hooks at lower frame location.
5. Secure front of cushion to body with bolts.
CAUTION:
-
Before installing seat, ensure that seat belt is placed on cushion.
-
Confirm that winding of three-point type seat belt can operate regularly.