Impreza Brighton Coupe AWD F4-2.2L SOHC (1997)
Evaporator Case: Service and Repair
Intake Unit with Evaporator
A: REMOVAL AND INSTALLATION
1. Disconnect battery negative terminal.
2. Discharge refrigerant using refrigerant recovery system.
3. Disconnect discharge pipe suction pipe and grommets.
4. Remove glove box.
5. Disconnect the harness connector from intake unit.
6. Disconnect drain hose.
7. Remove intake unit mounting bolt and nut.
8. Install the intake unit in the reverse order of removal.
9. Charge refrigerant.
B: DISASSEMBLY AND ASSEMBLY
