Impreza Brighton Coupe AWD F4-2.2L SOHC (1997)
Alignment: Service and Repair
Camber
1. Loosen two self-locking nuts located at lower front portion of strut.
CAUTION:
^
When adjusting bolt needs to be loosened or tightened, hold its head with a wrench and turn selflocking nut.
^
Discard loosened self-locking nut and replace with a new one.
2. Turn camber adjusting bolt so that camber is set at the specification.
NOTE: Moving the adjusting bolt by one scale graduation changes camber by approximately 0°10'.
3. Tighten the two self-locking nuts. Tightening torque: 152 ± 20 Nm (112 ± 14 ft. lbs.).