Impreza Brighton Coupe AWD F4-2.2L SOHC (1997)
a. Pry off dust seal using screwdriver.
b. Remove snap ring using snap ring pliers.
c. Pry off oil seal using screwdriver.
CAUTION: After removing, check inside surface of valve housing for damage. If oil seal contacting surface is damaged, replace valve housing
with a new one.
d. Press-fit oil seal into valve housing using ST and press.
NOTE: Before fitting, coat oil seal fully with specified power steering fluid.
e. Fit snap ring in snap ring groove using snap ring pliers.
CAUTION: Be careful not to scratch oil seal with snap ring pliers.
NOTE: Rotate snap ring to check for proper installation.
2. Pinion and Valve Assembly
a. Remove snap ring using snap ring pliers.
CAUTION:
^
Do not reuse removed snap ring.