Impreza Brighton Coupe AWD F4-2.2L SOHC (1997)
d. Place ST3 onto rear drive shaft so that spring can be inserted into hole in transfer piston seal.
e. Attach ST2 to rear drive shaft. Using ST1, press into place.
ST1 499247400 Installer, or equivalent.
ST2 499257300 Snap Ring Outer Guide, or equivalent.
ST3 499257400 Piston Guide, or equivalent.
CAUTION: Do not allow lip of transfer piston seal to fold back.
3. Install the driven plates, drive plates, and pressure plate, and secure with a snap ring with ST1, ST2 and a press.
ST1 398673600 Compressor, or equivalent.
ST2 498627000 Seat, or equivalent.
4. Apply compressed air to see if the assembled parts move smoothly.
5. Check the clearance.
