Impreza Brighton Coupe AWD F4-2.2L SOHC (1997)
1. While pushing release lever (3) to pivot and twisting it to both sides, fit retainer spring (5) onto the constricted portion of pivot.
NOTE: Confirm that retainer spring is securely fitted by observing it through the main case hole.
2. Install release bearing (6) and fasten it with two clips.
3. Install release lever seal (4).
4. After remounting engine and transmission on body, make adjustment of the clutch release lever end play.
CAUTION: Take care not to twist the cable during adjustment.
5. Install release lever return spring.
NOTE: Hook up the return spring to right side hole of the release