Impreza Brighton Coupe AWD F4-2.2L SOHC (1997)
ASSEMBLY
1. Position interlock plungers (5.56 x 19.6), one plunger in hole between 1-2 and 3-4 fork rod holes, and one plunger in hole between 3-4 and reverse
fork rod holes. (B): Rod holes
2. Install reverse shifter lever (1), reverse idler gear (2) and reverse idler gear shaft (3), and secure with straight pin (4).
NOTE: Be sure to install reverse idler shaft from the rear side.
3. Install reverse arm fork spring, ball and interlock plunger (5.56 x 19.6) to reverse fork rod arm (5). Insert reverse fork rod (6) into hole in reverse
fork rod arm (5), and hold it with outer snap ring (7) using Special Tool (ST).
ST 399411700 Accent Ball Installer, or equivalent.